Electrician
Fault finding & repairs in Plainland.
Tripping switches, dead circuits and weird gremlins, found and fixed.
Power that trips when it rains. One dead room. Lights that dim when the pump runs. Electrical gremlins are annoying right up until they are dangerous.
Fault finding is proper detective work with the right test gear, and it is some of the most valuable work we do. We find the actual cause and fix that, not the symptom.
The board that trips when it rains.
The Lockyer classic. Somewhere outside, water is getting into a fitting, a junction or an old garden light, and every decent storm your safety switch does exactly its job.
We test circuit by circuit, isolate the leg that leaks, and open up the point where water lives. The fix is usually small: a cooked outdoor fitting, a cracked conduit, a junction box that gave up years ago. Finding it is the skill.
Why the switch keeps tripping.
A safety switch that will not hold is not being dramatic. Something on that circuit is leaking current, and the usual suspects are a failing appliance, moisture, or damaged insulation.
The worst response is bypassing or upsizing protection to make the annoyance stop, which converts a warning into a hazard. The right response is measuring where the leak is, and that is a half-hour job with the right meter.
Old wiring, honest advice.
Plenty of local homes still run sections of rubber or cloth-insulated wiring from the middle of last century. It did its time; it also crumbles when touched and was never earthed the way modern rules demand.
If we open a wall or ceiling and find it, you get photos and plain-English options: what is genuinely urgent, what can be staged, what it costs. No scare campaign, just what we would do in our own house.
Storms, surges and getting you back on.
After a big storm we triage: no power at all, partial power, or power that will not stay on. Some of it is Ergon's side of the fence and we will tell you straight so you are not paying us to wait for them.
What is on your side, from cooked circuits to surge-damaged boards, we repair and test the same visit wherever parts allow. Priority goes to fridges, medical gear and water pumps, because that is what actually matters.
What's included.
- Systematic testing, not parts-swapping guesswork
- Tripping safety switches and breakers traced
- Dead circuits and dead rooms brought back
- Water-damaged and storm-damaged wiring
- Rodent and ant damage found and repaired
- Report on anything else we spot while in there
Prefer to just call?
Straight answers from Marshall Electrical. No pressure, no lock-in.
0447 216 905Simple, start to finish
How we work.
01
Tell us the job, get a number
Call or send the form. Straight advice and a written quote before anything happens.
02
A licensed sparky turns up
The person who quoted is the person on the tools. On time, insured, licensed.
03
Done safe, tested properly
Every circuit tested with real instruments before we call it finished. No she-will-be-right.
04
Certificate and tidy-up
Compliance paperwork emailed where required, mess gone, board labelled in plain English.
Tested and certified. Included, always.
Every job ends with proper testing, and a compliance certificate where the rules require one. You get proof the work is safe and legal, not a verbal assurance. That is what licensed work means.
Straight from Google
What locals are saying.
4.9 on Google · 34 reviews
“Josh rewired our old Queenslander and sorted the switchboard in a day. Clean work, fair price, and he actually answers his phone.”
“Had safety switches and new smoke alarms put in before we leased the house out. Straightforward, tidy, and the certificate was emailed that night.”
“Ran power to the new shed including the trench. One quote, no surprises, done when he said it would be.”
Fair questions
Fault finding & repairs FAQs.
Half the house has no power. What do I check first?
The board. If a safety switch or breaker is down, try resetting once. If it will not hold, something is genuinely wrong: unplug appliances on that circuit and call. Never hold a switch on.
Do you charge to find the fault?
Fault finding is time-based and we tell you the rate up front. Most faults are found inside the first hour, then you get a fixed price for the repair before we do it.
Why do my lights flicker when the pump starts?
Motor start-up draws a spike, and on a marginal circuit or a tired connection you see it in the lights. Sometimes benign, sometimes a warning. It is worth a look, especially if it is new behaviour.
Is old wiring really dangerous?
Age alone is not a verdict, but perished insulation, no earth and overloaded circuits are. An inspection gives you facts and photos, then you decide with real information.
The whole area, covered
Where we work.
More services: switchboard upgrades · lighting, fans & power points · safety switches & smoke alarms · shed & rural power · renovations & new builds
Services
Everything else we do.
Switchboard upgrades
Old fuse boxes replaced with safe, compliant switchboards.
Lighting, fans & power points
New lights, ceiling fans, extra power points, indoors and out.
Safety switches & smoke alarms
Life-saving basics, fitted and certified to QLD rules.
Shed & rural power
Power to sheds, pumps, gates and everything down the paddock.
Renovations & new builds
Full electrical fit-outs, from slab to final test.
No obligation
Get a free quote.
Tell Marshall Electrical about the job. Your details go straight to their inbox and they'll call you back, usually the same day.
Prefer to talk? 0447 216 905
No spam, no obligation, no call centres.
Sent!
Marshall Electrical has your details and will call you back shortly.
Ready to get it sorted?
Free quote from Marshall Electrical, usually the same day. No pressure, no lock-in, no call centres.